Pro Sprinkler Repair is a local service company, based in Idaho, that provides many sprinkler services. We have years of experience in irrigation repair and proud to be based in the Treasure Valley. Today we will be answering eight common questions that our Nampa, Idaho homeowners have regarding their lawn sprinkler system.
Should I repair or replace my sprinkler system?
The answer to this question will be different for each customer. Most homeowners opt for repairing the main sprinkler issues because of cost. This is the right choice for fixing sprinkler heads, minor leaks, or drip irrigation. However, certain factors that may justify installing an entirely new sprinkler system. Conditions where a new system is recommendable may include changing the landscape (such as adding a patio or pool, the system is old and not able to perform, the original design of the system does not allow for proper coverage, or root intrusion has rendered the system inoperable. If you are experiencing any of these sprinkler problems, it may be the right time to replace your sprinkler system.
How much does it cost to repair a sprinkler system?
Pro Sprinkler Repair charges a $125 service charge for basic repairs. This may include fixing a broken sprinkler head, diagnosing a low water pressure issue, or fixing broken sprinkler lines. The first repair is included in this service charge. The following repairs are not covered by the service charge: repairs to sprinkler valves, controller replacements, breaks caused by root intrusion, or replacing sprinkler lines. If your sprinkler system needs additional repairs, we will provide a free estimate to include the necessary repairs. Free estimates allow customers to anticipate the cost of the sprinkler system repairs.
What is the cost to replace a sprinkler valve?
Replacing sprinkler valves is a common repair for sprinkler systems that older than 10 years. The average cost to replace a sprinkler valve ranges between $300-$600, depending on how many valves are put together in the box. Each valve adds fittings, lines, and wiring to the project. Replacing sprinkler valves requires that the box be dug up to manipulate the pipes and access the components. Pro Sprinkler replaces every valve in the box, in order to effectively warrantee the repair and provide the best service possible.
How much does it cost to replace a solenoid on a sprinkler system?
Solenoids one of the electrical components of the sprinkler valve. It communicates with the controller and opens the valve. The cost of a replacement solenoid is around $20. To have this repair done by the skilled technicians at Pro Sprinkler, this service costs $125. For the DIYers, the best place to purchase replacement solenoids is online. To replace a solenoid you must first turn off the water. Then, unwire the 2 wires on the original solenoid you are replacing. Unscrew the solenoid from the valve. Check that the new solenoid has a healthy O-ring in place. Screw in the new solenoid and wire in the same fashion as the previous one. Turn on the water and test the sprinkler zone from the controller to see if it works.
How to repair a sprinkler line?
Making a repair to a sprinkler line is simple in principle, but may prove to be more difficult in practice. First, you must identify where the leak is coming from. Then you must dig up the line with plenty of room along the pipe to work. The line will either be PVC (white) or Polyethylene (black or green). For repairs of PVC lines you must purchase an expandable repair coupling, primer, and glue. PVC pipe is rigid and inflexible. You will cut out the broken section of pipe (Note: PVC pipe commonly breaks at joints and fittings such as tees). You will prepare the pipe and coupler with primer. Once dry, you will add the glue to both the pipe and coupler. Push onto the pipe and hold in place. Follow the instructions on the can for dry time. Conversely, poly pipe is semi-flexible and does not require glue. You can cut out the broken section of poly pipe, insert a coupler, and add hose clamps for an effective repair.
How much does a sprinkler blowout cost?
Sprinkler blowouts or winterizations is a yearly service, performed in the Fall to protect the sprinkler system from freezing temperatures. Pro Sprinkler Repair charges $125 for this service. We connect a powerful air compressor to the system and ‘blowout’ the water from the valves, lines, and heads.
What should I look for when hiring a sprinkler system contractor?
There are many companies to choose from when looking for a sprinkler system contractor. Many customers find that hiring a good company can be frustrating. Missed calls, no-shows, and not so fair prices are a few of the challenges to finding an Idaho sprinkler repair company. That’s why Pro Sprinkler Repair is different. Our motto is, “we answer the phone”. We follow up with timely repairs, a reasonable price, and top notch quality services.
As a new homeowner, what should I know about sprinkler systems?
If you did not have a sprinkler system at your previous home or are new to home ownership, sprinkler systems can be intimidating. A healthy lawn with no dry spots wont come without some regular maintenance. Don’t worry, we are here to help. Our pro services will ensure that new customers get the routine maintenance their system needs. Most homeowners are responsible to watch for common issues, schedule repairs, and ensure that they system is programmed properly. At Pro Sprinkler, we do things differently. Our annual plan covers all of the maintenance needs of tour sprinkler system. We turn the system on in the Spring and program the controller. We make adjustments and repairs as needed. And, we schedule the Fall winterization service so you don’t have to. Switch to the Annual Plan and save!
So, regardless of the condition of your system or your experience, count on Pro Sprinkler to deliver great customer service and leave you with the efficient sprinkler system that you deserve.
